Tuesday, May 8, 2012

Operational Amplifiers (Opam)


Section I - INTRODUCTION:

What is an Operational amplifier?

   An Opam is basically a high gain amplifier, where the gain can be easily varied without affecting the stabily of the amplifier. It has a very distinct feature to amplify even a very small signal in the range of 0.0001V, which other amplifiers fail to do so.


Why the name Operational amplifier?

   Initially Opam was intoduced to perform some mathematical operations like addition, subtraction, integration, differentiation, averaging etc. Hence, it has obtained the name Operational amplifier or Opam.


Where it is used?

Opam is a versatile device as it can be used for both ac and dc input signals. Hence, as i said earlier, Opam forms the heart of almost all the electronics devices currently being used. So it has a vast range of applications in:

1) Amplifiers: DC amplifiers, AC amplifiers, Differential amplifiers, DIDO amplifiers, Peaking amplifiers, Instrumentation amplifiers, Summing/averaging/scaling amplifiers etc.

2) Converters: V-I converter, I-V converter, Voltage-Frequency converter, Frequency-Voltage converter, A/D converters, D/A converters etc.

3) Filters: First order, Second order, High pass, Low pass, Band pass, Band reject, notch, all pass filters etc.

4) Oscillators: Phase shift, Wein bridge, Quadrature oscillators , VCO etc.

5) Generators: Square wave, Rectangular wave, Triangular wave, Sawtooth wave generators etc.

6) Comparators and Detectors: Basic comparator, Zero crossing detectors, Schmitt trigger, Window detectors, Peak detectors, Sample and hold circuit etc

7) Clippers and Clampers: Positive and negative clippers, Positive and negative clampers.

8) Signal processor: Integrator, differentiator etc.

9) In other devices: PLL, IC555 etc.

10) Other apps: LED temperatue indicator, obstacle avoider robot, line follower robot, DC speed control etc.



Basic Symbol of opamp:


1) Inverting Input: When input signal is applied to this terminal, then the output produced is an inverted amplified version of the corresponding input.

2) Non Inverting Input: When input signal is applied to this terminal, then the output produced is just an amplified version of the corresponding input.

3) Supply terminals (+Vss, -Vss): Power Supply is applied in these two terminals. Basically a dual power supply is used which can provide +24&-24 or +30&-30.

4) Output terminal: Output is taken from this pin w.r.t. ground.



Pin Diagram of Opam: